Home > DeWalt Engineered By Powers > Powder Actuated Direct Fastening > Hammer Drive Pins - No Powder Loads Required > Powers Fasteners 50298 1/4" x 1-1/4" Hammer Drive Pin (100/Box)

Home > Powers Fastening Innovations > Powder Actuated > Hammer Drive Pins - No Powder Loads Required > Powers Fasteners 50298 1/4" x 1-1/4" Hammer Drive Pin (100/Box)


Powers Fasteners 50298 1/4" x 1-1/4" Hammer Drive Pin (100/Box)

Item #:50298-PWR
Retail:$12.88
Quantity:
Powers Fasteners 50298 1/4" x 1-1/4" Hammer Drive Pin (100/Box)

Product Description


Hammer Drive pins are designed for permanently fastening a fixture to concrete and some types of masonry. This fastener is designed for use in a standard hand tool and should not be used in a powder actuated tool. The pins are formed with a 1/4” diameter head on one end and a 0.140” diameter shank in various lengths. A 3/8” diameter steel washer is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation.


This fastener is recommended for light duty static load applications where holding power is not a critical factor. It should not be used overhead.


E-commerce by Yahoo!