The Aerosmith Nylon Toggle is a one-piece pre-assembled drywall and hollow cavity anchor that can be used in hollow wallboard or hollow block applications. The anchor consists of a carbon steel wing and an engineered plastic strap. Simply fold the wing perpendicular to the strap, push wing through the proper pre-drilled hole, pull back on the strap, and slide the plastic disc against the front of the wall. Snap off the remaining nylon, put fixture in place and screw into the wing using a machine bolt of the proper diameter. By folding the wing perpendicular with the strap, this allows the anchor to be installed into smaller holes than conventional spring wing toggles. Nylon toggles are available in 3/16”, 1/4”, 3/8”, and 1/2” diameters.