Home > Simpson Strong-Tie > Anchoring & Fastening Systems for Concrete and Masonry > Adhesive Anchors > AT-XP® High-Strength Acrylic Adhesive

AT-XP® High-Strength Acrylic Adhesive

AT-XP is an acrylic-based high-strength anchoring adhesive. AT-XP is a 10:1 ratio, two-component, anchoring adhesive for use in threaded rod and rebar into concrete (cracked and uncracked) and masonry (uncracked) under a wide range of conditions. AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge.

Features

Excellent for use in cold weather conditions or applications where fast cure is required

Design flexibility — superior sustained load performance at elevated temperature

Jobsite versatility — can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C)

Code listed for installation with the Speed Clean™ DXS system without any further cleaning

Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads

Easy hole-cleaning procedure — no power-brushing required

Manufactured in the USA using global materials

Specifications

Mix Ratio/Type: 10:1 acrylic

Mixed Color: Teal

Base Materials: Concrete — cracked and uncracked, Masonry — uncracked

Base Material Conditions: Dry, water-saturated

Anchor Type: Threaded rod or rebar

Substrate Installation Temperature: 14°F (-10°C) to 100°F (38°C)

In-Service Temperature Range: -40°F (-40°C) to 180°F (82°C)

Storage Temperature: 14°F (10°C) and 80°F (27°C)

Shelf Life: 18 months for AT-XP10; 12 months for AT-XP13 and AT-XP30

Volatile Organic Compound (VOC): 30 g/L

Applications

Concrete Block: Grouted

Mass Timber / Cross-Laminated Timber

Concrete Block: Hollow (Ungrouted)

Seismic (New Construction)

Concrete: Cracked

Water / Wastewater Facilities

Seismic Retrofit

Included

AMN19Q - Included with each cartridge AMN19Q



Simpson Strong-Tie AT-XP10 AT-XP® High-Strength Acrylic Adhesive 9.4 oz. Coaxial Cartridge with AMN19Q Adhesive Mixing Nozzle $27.78	Simpson Strong-Tie AT-XP13 AT-XP® High-Strength Acrylic Adhesive 12.5 oz. Side-by-Side Cartridge with AMN19Q Adhesive Mixing Nozzle $36.88	Simpson Strong-Tie AT-XP30 AT-XP® High-Strength Acrylic Adhesive 30 oz. Side-by-Side Cartridge with AMN19Q Adhesive Mixing Nozzle $53.58


Simpson Strong-Tie CDT10S Manual Dispensing Tool for 10 oz. Single-Cartridge Adhesives $46.82	Simpson Strong-Tie ADT813S Manual Dispensing Tool for 12.5 oz. Cartridges $110.85	Simpson Strong-Tie ADT30S Manual Dispensing Tool for 30 oz. Cartridges $146.98


Simpson Strong-Tie ADTA30P Pneumatic Dispensing Tool for 30 oz. Cartridges $905.35	Simpson Strong-Tie ADTA30CKT Battery-Powered Dispensing Tool and Accessories for 30 oz. Cartridges $1,058.90	Simpson Strong-Tie AMN19Q-RP5 Adhesive Mixing Nozzle for AT-XP (Pack of 5) $11.48