Home > Simpson Strong-Tie > Anchoring & Fastening Systems for Concrete and Masonry > Adhesive Anchors > SET-3G™ High-Strength Epoxy Adhesive

SET-3G™ High-Strength Epoxy Adhesive

SET-3G is the latest innovation in epoxy anchoring adhesives with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions and temperature extremes.

Features

Exceptional performance — superior bond strengths permit ductile solutions in high seismic areas

Design flexibility — improved sustained load performance at elevated temperature

Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C)

Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions

Code listed for installation with the Speed Clean™ DXS, dustless drilling system without further hole cleaning

Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring

With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas

Low-odor formulation

Manufactured in the USA using global materials

Specifications

Mix Ratio/Type: 1:1 epoxy

Mixed Color: Gray

Base Materials: Concrete — cracked and uncracked

Base Material Conditions: Dry, water-saturated, water-filled and submerged

Anchor Type: Threaded rod or rebar

Substrate Installation Temperature: 40°F (4°C) to 100°F (38°C)

In-Service Temperature Range: -40°F (-40°C) to 176°F (80°C)

Storage Temperature: 45°F (7°C) and 90°F (32°C)

Shelf Life: 24 months

Volatile Organic Compound (VOC): 2 g/L

Applications

Mass Timber / Cross-Laminated Timber

Seismic (New Construction)

Water / Wastewater Facilities

Concrete: Cracked

Seismic Retrofit

Included

EMN22i - One mixing nozzle and extension included with SET3G10 and SET3G22-N



Simpson Strong-Tie SET-3G10 SET-3G™ Epoxy Anchoring Adhesive 8.5 oz. Coaxial Cartridge with EMN22i Mixing Nozzle (included) $34.05	Simpson Strong-Tie SET3G22-N SET-3G22-N SET-3G™ Epoxy Anchoring Adhesive 22 oz. Side-by-Side Cartridge with EMN22i Mixing Nozzle (included) $72.42	Simpson Strong-Tie SET3G56 SET-3G™ High-Strength Epoxy Adhesive SET-3G56 SET-3G™ Epoxy Anchoring Adhesive 56 oz. Side-by-Side Cartridge with EMN22i Mixing Nozzle (not included) $157.53


Simpson Strong-Tie CDT10S Manual Dispensing Tool for 10 oz. Single-Cartridge Adhesives $46.82	Simpson Strong-Tie EDT22S Manual Dispensing Tool for 22 oz. Cartridges $109.17	Simpson Strong-Tie EDTA22P Pneumatic Dispensing Tool for 22 oz. Cartridges $943.37


Simpson Strong-Tie EDTA22CKT Battery-Powered Dispensing Tool and Accessories for 22 oz. Cartridges $1,097.28	Simpson Strong-Tie EDTA56P Pneumatic Dispensing Tool for 56 oz. Cartridges $982.13	Simpson Strong-Tie EMN22I 18-element nozzle for 22 oz. and 56 oz.epoxy adhesive for EMN22i Adhesive Mixing Nozzle $4.97