Home > Simpson Strong-Tie > Restoration Solutions > Heli-Tie™ Helical Wall Tie > Simpson Strong-Tie HELI371200A 3/8" x 12" Type 304 Stainless Steel 7/32" or 1/4" Drill Bit Diameter Heli-Tie™ Helical Wall Tie (50 ct)

Home > Simpson Strong-Tie > Anchoring & Fastening Systems for Concrete and Masonry > Restoration Solutions > Heli-Tie™ Helical Wall Tie > Simpson Strong-Tie HELI371200A 3/8" x 12" Type 304 Stainless Steel 7/32" or 1/4" Drill Bit Diameter Heli-Tie™ Helical Wall Tie (50 ct)


Simpson Strong-Tie HELI371200A 3/8" x 12" Type 304 Stainless Steel 7/32" or 1/4" Drill Bit Diameter Heli-Tie™ Helical Wall Tie (50 ct)

Item #:HELI371200A
Retail:$434.17
Quantity:
Simpson Strong-Tie HELI371200A 3/8" x 12" Type 304 Stainless Steel 7/32" or 1/4" Drill Bit Diameter Heli-Tie™ Helical Wall Tie (50 ct)

Simpson Strong-Tie HELI371200A 3/8" x 12" Type 304 Stainless Steel 7/32" or 1/4" Drill Bit Diameter Heli-Tie™ Helical Wall Tie (50 ct)


The Heli-Tie helical wall tie is a stainless-steel tie used to anchor building façades to structural members or to stabilize brick walls.


The helical design allows the tie to be driven quickly and easily into a predrilled pilot hole (or embedded into mortar joints in new construction) to provide a mechanical connection between a masonry façade and its backup material. As it is driven, the fins of the tie undercut the masonry to provide an expansion-free anchorage that will withstand tension and compression loads.


The Heli-Tie wall tie is installed into a predrilled hole using a proprietary setting tool with an SDS-plus® shank rotohammer to drive and countersink the tie. Heli-Tie wall ties perform in concrete and masonry as well as wood and steel studs.


Features


  • Installs quickly and easily - with the rotohammer in hammer mode, the tie installs faster than competitive products.
  • Provides an inconspicuous repair that preserves the appearance of the building. After installation, the tie is countersunk up to 1/2" below the surface, allowing the tie location to be patched.
  • Larger core diameter provides higher torsional capacity, resulting in less deflection due to “uncoiling” under load.
  • Fractionally sized anchor - no metric drill bits required.
  • Patented manufacturing process results in a more uniform helix along the entire tie, allowing easier driving and better interlock with the substrate.


    Specifications


  • Model No.: HELI371200A
  • Coating/Material: Type 304 Stainless Steel
  • Size (in.): 3/8" x 12"
  • Drill Bit Dia. (in.): 7/32" or 1/4"
  • Box Qty.: 50
  • Carton Qty.: 200


  • E-commerce by Yahoo!